Для проверки CAN-bus/ECM Network of Vehicles вполне может пригодиться и такой малыш
Вложение:
Комментарий к файлу: PCAN-USB Interface
20180307_130926a.jpg [ 42.24 КБ | Просмотров: 6813 ]
Вложение:
Комментарий к файлу: PCAN-USB Interface Interior
214801_.jpg [ 71.17 КБ | Просмотров: 6747 ]
The PCAN-USB adapter enables simple connection to CAN networks.
The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
Feature.
- Adapter for the USB connection (Full-Speed mode, compatible with USB 1.1, USB 2.0, and USB 3.0)
- High-speed CAN connection (ISO 11898-2)
- Bit rates from 5 kbit/s up to 1 Mbit/s
- Time stamp resolution approx. 42 µs
- Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
- CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 303-1)
- NXP SJA1000 CAN controller, 16 MHz clock frequency
- NXP PCA82C251 CAN transceiver
- 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
- Galvanic isolation on the CAN connection up to 500 V (only for IPEH-002022)
- Voltage supply via USB
- Extended operating temperature range from -40 to 85 °C
Вложение:
pcan-usb_new.gif [ 22.6 КБ | Просмотров: 6459 ]
,
Возможности PCAN-OBD-2 API (API implementation of the OBD-2 Standard ISO 15765-4) и PCAN-PassThru API (PassThru API and Connection of PassThru Software to PEAK CAN Interfaces) описаны в
http://www.phytools.com/PCAN_APIs_s/1867.htmБыло бы любопытно "подслушать", например, диалог между Techstream и компами автомобиля...